2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 1717
DTC P061B
- Control Module Torque Calculation Performance
Circuit/System Description
This diagnostic applies to internal microprocessor integrity conditions within the hybrid powertrain control module (HPCM). The HPCM monitors
its ability to read and write to the memory. The HPCM processor monitors the data to verify that the indicated torque calculation is correct. The
HPCM is located within the drive motor generator power inverter module (PIM) and is not serviceable separately.
Conditions for Running the DTC
P061A
* Ignition voltage is 8-18V.
* Regenerative braking torque is greater than 0 Nm.
P061B
* Ignition voltage is 8-18V.
* Any output or brake torque is present.
Conditions for Setting the DTC
P061A
The control module has detected the internal software calculation for regenerative braking torque has an error of greater than 100 Nm.
P061B
The control module has detected a torque calculation error.
Action Taken When the DTC Sets
* DTCs P061A and P061B are Type A DTCs.
* The HPCM commands the battery energy control module (BECM) to open the high voltage contactor relays.
Conditions for Clearing the DTC
DTCs P061A and P061B are Type A DTCs.
Reference Information
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code
(DTC) Type Definitions)
Circuit/System Verification
1. Clear the DTC information.
2. Ignition OFF for 1 minute.
3. Ignition ON, start and drive the vehicle.
4. Retest for DTCs P061A and P061B.
Circuit/System Testing
P061A
Program the PIM with the latest software version and recheck for DTCs.
If the DTC resets after programming or if the PIM already contains the latest software version, replace the PIM.
P061B
1. DTC P061B may set when Hybrid Battery power output is limited. A reduced hybrid battery power condition is most noticeable during high
electrical loads such as Autostop to Autostart transitions. Inspect for hybrid battery DTCs or conditions that would reduce available hybrid
battery power such as:
* Hybrid Battery Module undervoltage / P0AFA and various DTCs
* Hybrid Battery Module overvoltage / various DTCs
* Hybrid Battery Module voltage variation / P0AFA, P0BBD
* Hybrid Battery overtemperature / P0C32
* Hybrid Battery exposure to extreme cold
The Largest Catalog of Parts for your Audi, BMW, Mercedes Benz, MINI, Porsche, or Volkswagen ...Types: Replacement & Aftermarket, Performance Upgrades, Genuine OEM Parts.EBA AUTOMOTIVE is a global supplier of parts and accessories for European ,America,Asian vehicles. Specializing in both OEM and aftermarket replacement parts and accessories.