2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 418
B0968 01
The parking assist control module has detected a short to battery.
B0968 06
The parking assist control module has detected a short to ground or open.
Action Taken When the DTC Sets
* The parking assist is disabled.
* The driver information center displays SERVICE PARK ASSIST.
Conditions for Clearing the DTC
The condition for setting the DTC is no longer present.
Reference Information
Schematic Reference
Object Detection Schematics (See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Diagrams/Electrical
Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)
Description and Operation
Object Detection Description and Operation (UVC) (See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Description and Operation/Object Detection (UVC))Object Detection Description and Operation (UD5) (See: Accessories and Optional
Equipment/Collision Avoidance and Parking Assist Systems/Description and Operation/Object Detection Description and Operation (UD5))
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning)
Circuit/System Verification
1. Verify that DTC B0967 02 is not present.
瀚慖f DTC is present, refer to Parking Assist Switch Malfunction.
2. Verify that B0968 01 or B0968 06 is not present.
瀚慖f DTC is present, refer to Parking Assist Switch Indicator Malfunction.
3. Activate and deactivate the parking assist switch and verify the scan tool Park Assist Switch parameter changes between Active and Inactive.
Circuit/System Testing
Parking Assist Switch Circuit Malfunction
1. Ignition OFF, disconnect the harness connector at the S48E multi-function switch module - center console.
2. Test for less than 10 ohm between the ground circuit terminal 2 and ground.
瀚慖f greater than the specified value, test the ground circuit for an open/high resistance.
3. Connect the harness connector at the S48E multi-function switch module - center console.
4. Disconnect the X1 harness connector at the K41 parking assist control module.
5. Ignition ON, test for less than 0.3 V between the signal circuit terminal 8 X1 and ground.
