2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 345
DTC B1000 37
- Electronic Control Unit (ECU) Performance Watchdog / Safety Failure
DTC B1000 38
- Electronic Control Unit (ECU) Performance Supervision Software Failure
DTC B1000 39
- Electronic Control Unit (ECU) Performance Internal Electronic Failure
DTC B1000 43
- Electronic Control Unit (ECU) Performance EEPROM Error
DTC B1000 46
- Side Object Detection Performance - Invalid Configuration
DTC B1000 56
- Electronic Control Unit (ECU) Performance Allowable Number of Transitions / Events Exceeded
DTC B1000 57
- Electronic Control Unit (ECU) Performance
DTC B1000 73
- Electronic Control Unit (ECU) Performance Parity Error
DTC B1000 0F
- Electronic Control Unit (ECU) Performance Erratic
DTC B1000 2B
- Electronic Control Unit (ECU) Performance Missing Reference
DTC B1000 2C
- Electronic Control Unit Performance Reserved
DTC B1000 3B
- Electronic Control Unit (ECU) Performance Internal Self Test Failed
DTC B1000 3C
- Electronic Control Unit (ECU) Performance Internal Communications Failure
DTC B1000 4A
- Side Object Detection Performance - PROM Checksum Error
DTC B1000 F0
- Side Object Detection RF Transmit Chain Failed
DTC B1000 F1
- Side Object Detection RF Receive Chain Failed
DTC B1000 F2
- Side Object Detection Frequency Calibration Failure
DTC B1000 F3
- Side Object Detection Inter-Processor Communication Failed
Circuit/System Description
The internal fault detection is handled inside the control module. No external circuits are involved.
Conditions for Running the DTC
The module runs the program to detect an internal fault when power up is commanded. The only requirements are voltage and ground. This
program runs even if the voltage is out of the valid operating range.
Conditions for Setting the DTC
The module has detected an internal malfunction.
Action Taken When the DTC Sets
