Friday, November 15, 2019

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 602

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 602



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptor



DTC B2910 00



- Steering Column Lock Password Incorrect



Circuit/System Description



The vehicle theft deterrent subsystem provides the capability to lock or unlock the steering electrically. The steering column lock control module is



allowed to unlock when power mode transitions to a non off power mode and an authenticated driver identification device is present. Once the



column is unlocked, a crank request can be allowed.



Conditions for Running the DTC



* The ignition is in OFF, ACCESSORY or RUN position.



* The system voltage is between 9-16 V.



Conditions for Setting the DTC



The steering column lock control module has not received the correct password or did not receive a password with the command to unlock the



steering column.



Action Taken When the DTC Sets



* DTC B2910 is stored in memory.



* The driver information center displays the service column lock system warning message.



* The steering column lock indicator is ON.



* The engine will not crank.



Conditions for Clearing the DTC



* The condition for setting the DTC is no longer present.



* The steering column lock control module has received the correct password with the command to unlock the steering column.



Diagnostic Aids



This DTC may set if the BCM was replaced and the steering column lock control module was not reprogrammed.



Reference Information



Schematic Reference



Column Lock Schematics (See: Diagrams/Electrical Diagrams/Steering/Steering Column)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



Steering Wheel and Column Description and Operation (See: Steering and Suspension/Steering/Steering Column/Description and Operation)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit



Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic



Procedures/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General



Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring



Repairs/Wiring Repairs)