2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 310
Actuator Replacement (Delphi))
* Control Module References (See: Testing and Inspection/Programming and Relearning)for HVAC control module replacement, setup, and
programming
B0423
DTC B0228, B0413, B0423, B0433, B3779, or B3782
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions)provides an overview of each diagnostic category.
DTC Descriptors
B0228 02
- Recirculation Position Feedback Circuit Short to Ground
B0228 04
- Recirculation Position Circuit Actuator Stuck
B0228 05
- Recirculation Position Feedback Circuit Short to Battery or Open
B0228 61
- Recirculation Position Circuit Actuator Out of Range
B0413 02
- Temperature Control 1 Feedback Circuit Short to Ground
B0413 04
- Temperature Control 1 Feedback Circuit Actuator Stuck
B0413 05
- Temperature Control 1 Feedback Circuit Short to Battery or Open
B0413 61
- Temperature Control 1 Feedback Circuit Actuator out of Range
B0423 02
- Temperature Control 2 Feedback Circuit Short to Ground
B0423 04
- Temperature Control 2 Circuit Actuator Stuck
B0423 05
- Temperature Control 2 Feedback Circuit Short to Battery or Open
B0423 61
- Temperature Control 2 Circuit Actuator Out of Range
B0433 02
- Temperature Control 3 Feedback Circuit Short to Ground
B0433 04
- Temperature Control 3 Circuit Actuator Stuck
B0433 05
- Temperature Control 3 Feedback Circuit Short to Battery or Open
B0433 61
- Temperature Control 3 Circuit Actuator Out of Range
B3779 02
- Air Flow Control 9 Feedback Circuit Short to Ground
Showing posts with label Actuator Replacement (Delphi)). Show all posts
Showing posts with label Actuator Replacement (Delphi)). Show all posts
Saturday, August 29, 2020
Thursday, August 27, 2020
2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 288
2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 288
Actuator Replacement (Delphi))
* Control Module References (See: Testing and Inspection/Programming and Relearning)for HVAC control module replacement, setup, and
programming
B257A
DTC B257A
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC B257A 00
- Headlamp Switch Input Signals Mismatch
Diagnostic Fault Information
Circuit/System Description
When the headlamp and panel dimmer switch is placed in the AUTO position, the body control module (BCM) receives a ground signal through
the headlamp switch headlamps OFF signal circuit. The headlamp and panel dimmer switch headlamps ON signal circuit and the park lamp switch
signal circuit are both open and have no ground signal. When the headlamp and panel dimmer switch is placed in the PARK or HEAD position, the
BCM will receive a ground signal through the headlamp switch headlamps ON signal circuit and the park lamp switch signal circuit. The headlamp
switch headlamps OFF signal circuit will be open and have no ground signal.
Conditions for Running the DTC
Battery voltage must be between 9-16 V
Conditions for Setting the DTC
The BCM detects a short to ground on the headlamp switch headlamps OFF signal circuit or the headlamp switch headlamps ON signal circuit.
Actuator Replacement (Delphi))
* Control Module References (See: Testing and Inspection/Programming and Relearning)for HVAC control module replacement, setup, and
programming
B257A
DTC B257A
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC B257A 00
- Headlamp Switch Input Signals Mismatch
Diagnostic Fault Information
Circuit/System Description
When the headlamp and panel dimmer switch is placed in the AUTO position, the body control module (BCM) receives a ground signal through
the headlamp switch headlamps OFF signal circuit. The headlamp and panel dimmer switch headlamps ON signal circuit and the park lamp switch
signal circuit are both open and have no ground signal. When the headlamp and panel dimmer switch is placed in the PARK or HEAD position, the
BCM will receive a ground signal through the headlamp switch headlamps ON signal circuit and the park lamp switch signal circuit. The headlamp
switch headlamps OFF signal circuit will be open and have no ground signal.
Conditions for Running the DTC
Battery voltage must be between 9-16 V
Conditions for Setting the DTC
The BCM detects a short to ground on the headlamp switch headlamps OFF signal circuit or the headlamp switch headlamps ON signal circuit.
Subscribe to:
Posts (Atom)